Car owners, beware! How thieves can steal your vehicle without touching the keys and why aluminum foil can help | Today’s news

Wrapping a car fob in aluminum foil may seem unusual, but the practice is linked to a growing concern among car owners: keyless car theft, in which thieves use electronic devices to capture or transmit signals from the key fob to unlock and start the vehicle.

Aluminum foil can act as a basic shield against RF signals, potentially preventing the detection or transmission of the key fob’s signal when the key is not in use. However, it must properly cover the pendant to be effective and does not replace dedicated signal blocking storage.

How does wrapping a car key in foil help?

Most keyless entry systems use high-frequency communication between the key fob and the car. When the key is within a certain range, the vehicle detects this and allows the door to be unlocked or the engine to be started without the driver having to insert the key.

Thieves can exploit this convenience using a technique known as a relay attack. Two people typically use an electronic device to capture and transmit communications between a key stored in the house and a vehicle parked outside. This allows the car to believe that its key is nearby, even if the owner has not approached it.

Aluminum is electrically conductive. When it completely surrounds the key fob, it can act as a basic Faraday shield, attenuating or blocking radio signals traveling to and from the device. This can make it harder for a thief’s device to detect and transmit the key signal.

The method is cheap and uses household materials. However, its effectiveness depends on how completely the fob is covered. A loosely wrapped key or a key with gaps in the foil can still transmit signals.

One layer of foil must not block the signal if the key is brought close to the vehicle. Adding more layers will prevent the car from being unlocked.

Instructions: How to properly wrap a car key fob

Motorists who wish to try the aluminum foil method can proceed as follows:

1. Choose a large enough sheet: Cut a piece of foil that is large enough to cover the entire keychain, including its sides, edges, and buttons.

2. Wrap the pendant completely: Place the key in the center of the foil and fold the material around it. Make sure that no part of the pendant is left exposed.

3. Use multiple layers: Add two or more layers to improve coverage. Make sure the layers surround the entire device and leave no holes around the edges.

4. Seal Gaps and Holes: Gently press the foil around the pendant to make a snug fit. Check for tears, loose folds or exposed parts, especially near the buttons and key ring attachment.

5. Test the cover: With the wrapped key, stand near the vehicle and try to unlock it using the usual keyless entry function. If the car still responds, the film may not block the signal enough. Adjust the packaging and test again.

6. Remove the film before using the key: The cover is designed to block wireless communication. The fob may not be able to unlock or start the car while it remains wrapped.

Is aluminum foil better than a Faraday bag?

Aluminum foil is a cheap, temporary option, but a purpose-built Faraday pocket or signal-blocking box is generally a more practical choice for everyday use.

Additional measures to reduce keyless car theft

Packing a key fob is just one precaution. Vehicle owners can take additional steps to reduce the risk of relay theft:

– Keep keys away from doors and windows: Store main and spare key fobs away from the vehicle and outside walls, doors and windows.

– Use a signal-blocking case: When not in use, store the primary and spare keys in a tested Faraday case.

– Disable wireless signals where possible: Some car manufacturers offer the option to disable the wireless function of the key fob. Check your vehicle manual or contact your dealer.

– Check that the vehicle is locked: Electronic devices can also be used to interfere with locking signals. Before leaving, manually verify that the door is locked.

– Consider additional physical security: A steering wheel lock, alarm or immobilizer can provide an additional layer of protection.

– Reprogram the keys when buying a used car: Ask the manufacturer or authorized dealer to ensure that keys no longer in the owner’s possession cannot be used to access the vehicle.

Does wrapping the car key in foil guarantee protection?

No. Aluminum foil should not be treated as a guaranteed anti-theft solution. Its effectiveness depends on the quality of the coating, the absence of gaps and the specific system of the key fob and the vehicle.

Police guidelines generally recommend purpose-built signal blocking bags rather than relying on homemade foil. A tested Faraday bag or box is a more convenient option for regular use, while physical security measures can provide additional protection.

Read also | This American teenage girl found an unusual way to earn $22,000: Selling advertising space on walls